Spectrum Remote Codes (Detailed Guide!) - The Tech Gorilla (2024)

The Spectrum remote codes allow you to control other devices using the Spectrum TV Stream remote.

With these codes, you can program your Spectrum TV remote to control devices like TVs, DVD Players, VCR players, and Blu-ray players.

I will provide the codes for connecting Spectrum remote on all devices in this guide.

List of Spectrum remote codes for TVs

List of Spectrum Remote Codes For DVD Players

List of Spectrum Codes for Game Consoles

List of Spectrum Remote Codes For Blu-ray Player

List of Spectrum Remote Codes For DVD Players

List of Spectrum Remote Codes For VCR Players

List of Spectrum Remote Codes For Soundbars

How do I find my Spectrum remote code?

I have provided the Spectrum remote code for the most common devices in this guide. However, if you can’t find the code for your specific device here, follow the steps below to find it;

1. Visit the Spectrum TV remote support webpage.
2. Select the device type and the manufacturer from the drop-down boxes on the webpage.
3. Select the Get Device Codes button.
4. A code or a few codes will appear below the Get Device Codes button. That’s the Spectrum remote code(s) for your device.
   

How to setup Spectrum remote

To set the spectrum remote to control other device(s), follow the steps below carefully;

1. Switch on the device you want to connect the remote to
   
2. Press the button on your Spectrum TV remote that corresponds with the device you want to connect to and the OK/SEL button simultaneously. For instance, if you want to connect to a TV, press the TV and the OK/SEL button simultaneously.
   
3. The LED light on the connecting device will turn on, indicating that it’s ready to connect.
   

Note: The LED light will only remain on for 30 seconds, so connect the remote while it’s still on.

4. Point the remote directly to the connecting device and enter the Spectrum remote code assigned to the device. For instance, 10812 if you are trying to connect a Samsung TV.

Note: If more than one Spectrum remote code is assigned to a device, try all the code one after the other until you find the one that works.

Also, make sure you pause for a second between entering each of the numbers on the code.

5. Point the spectrum remote to the connecting device and press the power or Channel (CH) buttons.

   The setup has succeeded if the device turns off or changes the channel.

   If it doesn’t repeat the process with a different code for devices with more than one code.

How to disconnect the Spectrum remote from your Device

To disconnect the Spectrum remote from your device, you need to reconnect it to your Spectrum cable box.

Here’s how to go about it;

1. Turn on your Spectrum TV cable box
2. Press and hold the CBL and OK/SEL buttons simultaneously for about 3 seconds and release
3. Press the volume up button.

Once you follow the steps above, the remote will control your cable box and not your device.

Spectrum Remote Codes Errors

The Spectrum TV remote may not work or display an error when you try to set it up with your device.

Some of the common error codes it could display include 1103 or 232. Also, the remote could have other issues, such as;

• LED light is not flashing on your device
• The red light is flashing repeatedly
• The device isn’t responding to the remote control, or it’s responding slowly.
• The volume is too low or too high, or the volume button isn’t responding.

In the next section, I will outline the troubleshooting methods you can apply to fix all the Spectrum remote code problems and errors.

How to fix Spectrum remote code not working and errors

1. Power Cycle the entire device

Sometimes, the receiving device can develop a glitch that prevents it from receiving signals from the Spectrum remote.

To fix this glitch, follow the steps below to power cycle the system.

1. Unplug all the devices in your set up from the power source.
2. Unplug all the cables connected to the device
3. Press and hold the power button on each device for 60 seconds to drain residual power or electric charge from the device(s)
4. Remove the batteries from your Spectrum remote, then press and hold the power button on the remote for 60 seconds.
5. Connect everything back and turn the system up.
6. Try setting up the remote using the spectrum remote codes and see if it works.

2. Replace the batteries on the remote

If the batteries on your remote are old, change them for a new one.

Old or dead battery remotes can reduce the chances of the Spectrum remote connecting with your device.

3. Remove obstructions

Make sure no objects or equipment are obstructing the signal traveling from your remote to the connected device.

If you have furniture, appliances, and other objects between the receiver and the remote, make sure you remove them.

4. Factory reset the remote

If you have tried all the troubleshooting methods, but your Spectrum remote isn’t working, you can reset it to its default settings.

This is one of the most effective ways to fix any issue with your Spectrum remote. Here’s how to go about it;

1. Press and hold the CBL and REC buttons on the remote simultaneously for about 10 seconds
2. While you press and hold, observe the remote light. It will move from right to left three times.
3. The remote will reset once the remote light moves from right to left three times.

5. Contact Spectrum TV support

If none of these solutions works for you, or if you are having issues setting up your Spectrum remote, contact Spectrum TV support for further assistance.

Final Thoughts

With the Spectrum remote code, you can manually connect your Spectrum and use it on any device.

If you don’t find the remote code on your device, follow the instructions in the “how to find my Spectrum remote code” section to get it.